5 – remove factory radio – Myron&Davis NV7TTD1 User Manual
Page 5
Advertising
Remove the OEM Radio and prepare the Myron and Davis Unit for installation by
following the steps below.
Note
: Inspect all fasteners and brackets for damage. Replace as necessary before the
installation process is started
5 – Remove Factory Radio
Step 5 - Remove the bolts located
under the radio
Step 5a - Remove the bolts hiden
underneath the radio
Step 6 - Remove the radio
Step 7 - Remove the brackets from
the factory radio
Step 8 - Install the brackets on the
Myron and Davis radio
Step 8 - Attach the harness supplied
by Myron and Davis
Advertising