5 – removal of the oem radio – Myron&Davis NV8ACC1 User Manual
Page 6
Advertising
Step 1 - Remove right screw under
right side dash trim
Step 2 - Remove left screw under
left side dash trim
Step 3 - Remove 2 bottom screws
securing OEM Radio
Step 5 - Loosen right side of the
OEM Radio
Step 6 - Remove OEM Radio
5 – Removal Of The OEM Radio
Remove the OEM Radio and prepare the Myron and Davis Unit for installation by
following the steps below.
Note:
Inspect all fasteners and brackets for damage. Replace as necessary before the
installation process is started.
Step 4 - Loosen left side of
the OEM Radio
Advertising