Atlantis A02-F5P - Manual (Page 2)

Ports 1-5(8) At the rear site of the Switch, ports 1-5(8)
are where you will connect your
Computers to the Switch
Power At the left site of the Switch, the power
port is where you will connect the AC
power adapter. Be sure to only use the AC
power adapter that came with the Switch.
The 5 UTP/STP ports support automatic MDI/MDIX
crossover detection function gives
true ‘plug and play’ capability,
with the Auto-MDI function, you
just need to plug-in the network
cable to the switch directly and no
need to care if the end node is NIC
(Network Interface Card) or switches and hubs.
Connect the Switch’s AC power adapter to the Switch’s
Power port. Plug the other end of the
adapter into an AC outlet. When
connected the AC power adapter to the
switch’s Power port and AC outlet will
immediately power on this Switch.