Switching on the appliance/selecting a programme, Changing the spin speed/selecting rinse hold – AEG LAVAMAT 50212 User Manual
Page 13
13
Switching on the appliance/selecting a programme
Set the programme and tempera-
ture using the programme knob.
3
By selecting a programme, you
switch the appliance on at the
same time.
The programme progress display
indicates the programme steps
that the selected programme will
perform.
Changing the spin speed/Selecting rinse hold
The washing machine suggests the
maximum permitted spin speed
that is suitable for the selected pro-
gramme. You can reduce this spin
speed:
To do this press the Spin/
(RINSE
HOLD) button repeatedly until the
desired indicator lights up.
3
The speed for the final spin can still be altered during the programme.
To do this:
1. Press the
(START/PAUSE) button.
2. Change the spin speed.
3. Press the
(START/PAUSE) button again.
(RINSE HOLD)
If
(RINSE HOLD) is used, the washing remains submerged in the final
rinse water. There is no final spin, only an intermediate spin. The inter-
mediate spin cycle depends on the selected programme and cannot be
changed.