LG GSL545NSQV - Manual (Page 12)


Po ustawieniu
OSTROŻNIE
2-MFL67788701_POLISH.indd 9 2013.5.3 1:51:34 PM
Cleaning
Regular cleaning is recommended. Wash all compartments with a baking soda solution
or a mild detergent and warm water. Rinse and dry.
Please verify that the power cord is not damaged, power plug is not overheated, or
power plug is well inserted into the wall outlet socket.
Always remove power cord from the wall outlet prior to cleaning near to electrical
equipment (lamps, switches, controls, etc.). Wipe up excess moisture with a sponge or
cloth to prevent water or liquid from getting into any electrical part and causing an
electric shock. Never use metallic scouring pads, brushes, coarse abrasive cleaners,
strong alkaline solutions, flammable or toxic cleaning liquids on any surface. Do not
touch frozen surfaces with wet or damp hands, because damp object will stick to
extremely cold surfaces.
It is important that your refrigerator be kept clean to prevent undesirable odours. Spilled
food should be wiped up immediately, since it may acidify and stain plastic surfaces if
allowed to settle.
Use a luke warm solution of mild soap or detergent to clean the durable finish of your
refrigerator. Wipe with a clean damp cloth and then dry. Exterior
Interior
After cleaning
WARNING
•
Do not directly spray water inside or outside the refrigerator. - There is a risk of fire
or electric shock.
•
Do not spray cleaning products directly on the display. - Printed letters on the display
may come off.
•
Remove any foreign matter or dust from the power plug pins. But do not use a wet
or damp cloth when cleaning the plug, remove any foreign material or dust from the
power plug pins. - Otherwise there is a risk of fire or electric shock.
Suggestion for energy saving
•
Please do not keep the door open for a long time, close door in the shortest time.
•
Storing too much food is not recommended. Sufficient space should be left to ensure
proper air circulation.
•
Do not set the temperature of fridge freezer lower than needed. Do not put food near
the temperature sensors. Keep the distance of at least 5mm from the sensors.
•
Allow hot food to cool prior to storing. Placing hot food in the fridge freezer could
affect other food, and lead to higher energy consumption.
•
Do not block air vents. Smooth circulation of cold air maintains the appropriate
temperature.
•
Do not open the door frequently. Opening the door lets warm air enter the fridge-
freezer, and causes the temperature to rise.
•
The configuration of shelves, baskets and drawers supplied by the manufacturer is the
most efficient in terms of energy saving
CAUTION
Care and maintenance
ENGLISH