Operation, Temperature adjustment, Temperature regulation – SOLAR WATER HEATER SB6 80 SOTX User Manual

Page 6: Temperature settings

Advertising
background image

6

Water

Time to Produce 2nd & 3rd

Temperature

Degree Burns on Adult Skin

170°F

Nearly instantaneous

160°F

About 1/2 second

150°F

About 1-1/2 seconds

140°F

Less than 5 seconds

130°F

About 30 seconds

125°F

About 2 minutes

120°F

More than 5 minutes

FIGURE 7

TEMPERATURE ADJUSTMENT

To adjust the temperature setting:

1. Turn “OFF” the electrical power to the water heater, at the

junction box.

WARNING

HAZARD OF ELECTRICAL SHOCK! Failure to turn “OFF” electric
power to the solar water heater will result in the possibility of
DEATH, SERIOUS BODILY INJURY OR PROPERTY DAMAGE.

2. Take off the access panel and fold away the insulation.

3. Turn the water temperature dial clockwise (

) to increase

the temperature, or counterclockwise (

) to decrease the

temperature.

4. Fold the insulation back in place and replace the access

panel.

5. Turn “ON” the power supply.

FIGURE 8

TEMPERATURE REGULATION

WARNING

HOTTER WATER CAN SCALD: Solar water heaters are intended
to produce hot water. Water heated to a temperature which will
satisfy clothes washing, dish washing, and other sanitizing
needs can cause scalds resulting in serious personal injury
and/or death. Some people are more likely to be permanently
injured by hot water than others. These include the elderly,
children, the infirmed, or physically handicapped. If anyone using
hot water in your home fits into one of these groups or if there is
a local code or state law requiring a certain temperature water
at the hot water tap, then you must take special precautions
Please see Figure 7. In addition to using the lowest possible
temperature setting that satisfies your hot water needs, some
type of tempering device, such as a mixing valve, should be
used at the hot water taps used by these people or at the solar
water heater. Mixing valves are available at plumbing supply or
hardware stores. Follow manufacturers instructions for
installation of the valves. Before changing the factory setting of
the thermostat, read the Temperature Adjustment section.

WARNING

KEEPING THE THERMOSTAT SETTING AT 120°F WILL REDUCE
THE RISK OF SCALDS
. Never allow small children to use a hot
water tap, or to draw their own bath water. Never leave a child or
handicapped person unattended in a bathtub or shower.

TEMPERATURE SETTINGS

NOTE: This residential solar water heater will not supply
sanitizing hot water for dishwashers.

The thermostat is factory set at its lowest position which
approximates 120°F (Hot) and is adjustable if a different water
temperature is desired. Read all warnings in this manual and
on the solar water heater before proceeding.

TEMPERATURE SETTINGS

HOT - is a thermostat setting of approximately 120°F,

which will supply hot water at the most
economical temperatures.

A - is a thermostat setting of approximately 130°F.

B - is a thermostat setting approximately 140°F.

C - is a thermostat setting approximately 150°F.

VERY HOT - is a thermostat setting of approximately 160°F.

It is recommended that the dial be set lower
whenever possible.

OPERATION

Advertising
This manual is related to the following products: