Audiovox Dual Handset Cordless Phone - Manual (Page 22)

E - 21
Handset could be set to walkie-talkie mode. In walkie-talkie mode, handset could
communicate with other handset even the base is unavailable.
ENABLE WALKIE-TALKIE MODE
- By manual
• Press scroll keys 6/5(6) to select “W-TALKIE” and press YES (3) to confirm.
• Press 6/5(6) to select walkie-talkie mode on or off (e.g. “MODE ON ) and press
YES (3) to comfirm.
• Press scroll keys 6/5(6) to assign walkie-talkie ID number.
• Press YES (3) to confirm the setting and handset will enter to walkie-talkie mode.
Note : For each handset, a different ID# must be assigned, for example: if you have 2
handsets, the first one should be set to W-T ID1 and the second handset should be set
to W-T ID2 & so on for the additiont of more handsets.
- By short-cut key (For Twins Handsets version only)
• Press and hold ‘ * ‘ key for 1 second in standby mode.
DISABLE WALKIE-TALKIE MODE (BACK TO PHONE MODE)
- By manual
• Press scroll keys 6/5(6) to select “W-TALKIE” and press YES (3) to confirm.
• Press 6/5(6) to select walkie-talkie mode on or off (e.g. “MODE OFF ).
• Press YES (3) to confirm the setting and handset will go back to phone mode.
- By short-cut key (For Twins Handsets version only)
• Press and hold ‘ * ‘ key for 1 second in walkie-talkie mode.
MAKE WALKIE-TALKIE CALL.
• Press the dial keys (7) to enter the ID# for the handset you want to call, then press
YES (3) to call.
• A calling tone could be heard if it is available and within the communication range.
• Press the NO (5) key to end the call.
WALKIE-TALKIE FUNCTION
9038_2_ib_e.p65 10/31/03, 12:20 PM 21