LG D959 - Manual (Page 17)

16
Getting to know your phone
Installing the micro SIM card
Before you can start exploring your new phone, you’ll need to set it up. The
micro SIM card tray eject button is a small round aperture on the tray door. To
install a new micro SIM card:
1 Insert the micro SIM ejection tool that comes with the phone (or a thin
pin) into the eject button aperture and push gently but fi rmly until the tray
pops out.
Eject button aperture
2 Remove the tray and place the micro SIM card inside it (see image above).
There is only one possible way to fi t the card snugly into the tray.
3 Carefully reposition the tray in the slot and push it gently back into the
phone.
NOTE: Turn the phone off before inserting or removing the SIM card.
Warning! Always be careful. The ejection tool is a very sharp.