Installing the battery and microsd card, The basics, Installing & removing the battery – LG AS870 User Manual

Page 18: Inserting a microsd card

Advertising
background image

18

The Basics

Installing the Battery and microSD Card

NOTE

It is important to fully charge the battery before initial use of the phone.

Installing & removing the battery

The phone comes with a rechargeable battery. Keep the battery charged
while not in use in order to maximize talk, use, and standby time. The
battery charge level is shown at the top right corner of the screen.

1 Use the fingertip

cutout at the bottom
of the phone to
remove the battery
cover.

3 Place the back cover

over the battery
compartment, then
press it downward
until it clicks into place.

2 Align the battery

contacts with the
terminals in the
battery compartment
and push the battery
down until it clicks
into place.

Inserting a microSD card

1. Remove the back cover (as demonstrated in the previous instructions)

and locate the microSD card slot (microSD is inscribed near the slot
opening).

2. Position the microSD card with the label side facing up and slide it into

place until it is fully inserted and locked in place.

NOTE

The microSD card can be easily damaged by improper operation. Please be careful when

inserting, removing or handling it.

NOTE

microSD cards are optional and sold separately.

To remove the microSD card

1. You must first unmount the microSD card prior to removing it (see

section below).

2. Remove the back cover and locate the microSD card slot.

3. Carefully pull the microSD card out to remove it.

Advertising
This manual is related to the following products: