LG 29FX4BL-LG - Manual (Page 24)

You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Here shown may be somewhat different from your set.
These are an example drawing of typical jack layout.
1. IN 1 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Press the TV/VIDEO button to select AV1 .
2. IN 2 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Press the TV/VIDEO button to select AV2 .
3. IN 3 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Press the TV/VIDEO button to select AV3 .
4. OUT JACKS: Connect external equipment inputs (VCR, Audio amplifier) to these outputs for recording
or monitering the selected program.
Note: This TV is programmed to remember which mode it was last set to, even if you turn the
TV off.
Connection of external equipment (some models)
Connecting AUDIO/VIDEO IN Jacks
1. Connect the audio/video output jacks of the VCR to
IN 1 or IN 2(A/V) jacks on the side or back of TV.
If you connect the audio jack only, you can't hear the
sound from the TV.
2. Press the TV/VIDEO button to select AV1 or AV2 .
Note: In some stereo models, if you connect the
audio/video output jacks of the VCR to the AV
AV IN 3(A/V) jacks on the front or side of TV,
select
AV3 .
3. Press the PLAY button on the VCR.
The video playback is on the TV screen.
Note: In case of MONO VCR, connect the output jack of VCR to the AUDIO L/MONO IN jack of TV so
that the sound can be heard from both speakers. If you connect it to the AUDIO R IN jack of TV
the sound is heard only from right speaker.
24
OUT
IN1
AUDIO (L/MONO) (R) VIDEO
OUT
IN1
AUDIO (L/MONO) (R) VIDEO
COMPONENT
DVD IN(480i)
Y P B P R
IN2
VIDEO (L/MONO) (R) AUDIO
1
4
2
VIDEO
AUDIO
L/MONO
R
AV IN 3
VIDEO
AUDIO
L/MONO
R
AV IN 3
3
< TV >
< TV >
< Playback VCR >
VIDEO
AV IN 3
AUDIO R L/MONO
3