Using ir blaster – LG 55GA7900 User Manual
Page 32
32
ENG
ENGLISH
MAKING CONNECTIONS
Using IR Blaster
Universal remote control setting enables user to control multiple devices with a single remote controller. In order to
continue the setting, please check, if IR Blaster and other devices are connected with TV properly.
When set-top box is connected:
1
Connect the IR Blaster Cable to the TV. Place the transmitter in front of the Set-top vox.
2
Home > All Apps > Settings > Video input > Add device manually.
3
Select a device and
Next. The TV signal playing is displayed.
4
Select your device type.
5
Select your lineup provider. (when device type is Cable box, Satellite receiver or DVR)
6
Select the manufacturer of the selected device.
Check if the IR Blaster is firmly plugged into the IR Blaster port and is placed near the remote sensor of your device.
and Select
Next.
7
Select
Send POWER or Press CH up/down to test the code. If the code is not matched, select No, try next code to
find the corresponding code. If the code is matched, select
Yes.
8
Analyzing channels.
Select Next. (when device type is Cable box, Satellite receiver or DVR)
9
Select
Finish. Your device is registered.
y
The steps may differ depending on connected device.
NOTE