LG PA77U - Manual (Page 28)

28 USING THE PROJECTOR
USING THE
PROJECTOR
Connecting to an
Antenna or Cable
To watch TV using an indoor/outdoor
antenna, connect a wall terminal and the
antenna port of the Projector using an
RF cable (75 Ω).
You can watch terrestrial or cable
(analog, digital) TV.
(The RF cable is sold separately.)
$17(11$,1
NOTE
y Make sure not to bend the copper
wire of the RF cable (75 Ω). Turn
the input jack to the right to fasten it.
Copper wire
y Ensure you use a standard coaxial
cable (75 Ω, sold separately) when
connecting to the projector input.
y For better image quality in
locations where signal strength is
low, purchase and install a signal
amplifier (booster).
y A signal splitter is required if you
want to use two or more projectors
through one antenna.
y If you have any problems when
installing the antenna, please
consult a suitable retailer or the
store where you purchased the
antenna.