LG N2R1DB2 User Manual
Page 19
2. LG Network Storage Installation
1
④ System loads system files as it reboots. LG Network Storage shall not be accessed
during the system reboot process.
⑤ After approximately 60 seconds, system reboot is completed with a light alarm
sound. (In the case that network connection has been activated)
⑥ All basic installation required for running the LG Network Storage has been
completed.
In order to configure the volume required for storage of the LG Network Storage user
data, please refer to Chapter 4 and use the web.
* At RAID configuration, the hard drive number and size will determine the RAID
configuration time.
Total HDD Capacity
System File
Installation
Volume and RAID
[Individual disks]
Volume and RAID
[RAID 1]
500GB (250 GB * 2)
Approx. 10
minutes
Approx. 5
minutes
Approx. 1 hour
1TB (500 GB * 2))
Approx. 10
minutes
Approx. 10
minutes
Approx. 1-2 hour
2TB (1 TB * 2)
Approx. 10
minutes
Approx. 20
minutes
Approx. 4-5 hour
Note: It is recommended not to use the LG Network Storage while RAID
configuration, as this will cause retardation.
* If the Hard disk has been in use, all the data on it will be lost.