LG L1200 - Manual (Page 110)

107
GPRS Attach (Menu 9.6.3)
If you select Power On and you are in a network that supports packet data,
the phone registers to the GPRS network and sending short messages will
be done via GPRS. Also, starting an active packet data connection, for
example, to send and receive e-mail, is quicker. If you select When
Needed, the phone will use a packet data connection only if you start an
application or action that needs it. The GPRS connection is closed after it
is not used by any application.
Access Point (Menu 9.6.4)
This feature sets the Profile during the WAP and MMS connections.
Please see page 73 for further detail. The Profile menu under the Access
Point feature will display Add, Delete and Editor options, but the reason
why Activate option is not available is because there is no way of knowing
whether WAP or MMS will be used to activate the content.
Reset Access Point (Menu 9.6.5)
This allows Profile information to be restored to original setting. For
example, this option will restore the Profile that has been deleted by the
Delete All selection from the Access Point (Menu 4.4) submenu.
Reset Setting Menu 9.7
You can easily reset your phone to its default configuration. To do so,
proceed, as follows.
1. Select the Reset Settings menu option.
2. Enter the 4-digit phone password.
Note I f there is no GPRS coverage and you have chosen Power on, the
phone will periodically try to establish a packet data connection.
Settings
Note The password is preset to 0000.