LG WM2140CW - Manual (Page 24)

H O W TO U S E
CYCLE OPTIONS BUTTONS
(cont.)
SPECIAL FUNCTIONS
Certain buttons also activate special functions,
including CHILD LOCK.
Selecting Cycle Options with the OPTION
Button
Press the OPTION button to add one of
the following options to a cycle. Pressing
the button repeatedly will cycle through
the options.
NOTE: Only one of the following options can be
selected at a time.
PRE-WASH
Press the OPTION button to select
this option to add 13 to 17 minutes
prewash and spin cycle to the chosen cycle.
This is especially useful for heavily soiled items.
RINSE+SPIN
Select this option to rinse and spin a
load separately from a regular cycle.
This can be helpful in preventing fresh stains from
setting in fabrics.
QUICk CYCLE
The QUICK CYCLE option has a very
short cycle time. Recommended
uses include freshening newly purchased clothing
or items that have been packed away.
TUB CLEAN
A buildup of detergent residue can
occur in the wash tub over time and
can lead to a mildewy or musty smell. The TUB
CLEAN cycle is specially designed to remove this
buildup. After the cycle has ended, open the door
and allow the drum interior to dry completely.
NOTE: Do NOT use this cycle with clothes, and do
NOT add detergent or fabric softener.
NOTE: If you use the TUB CLEAN cycle on a
monthly basis, the wash drum will be kept clean.
HAND WASH/WOOL
• Only woolen items that are designated as
“Machine-Washable” should be washed in this
washing machine.
• Wash only small loads for optimum fabric care
(less than 8 lbs.)
• Only neutral (wool safe) detergents should
be used. (Only a small quantity of detergent
is needed due to the small load size and low
volume of water in the cycle.)
• The HAND WASH/WOOL cycle uses a gentle
tumble action and low speed spin for ultimate
fabric care.
®
The wool wash cycle of this machine has been
approved by Woolmark for the washing of machine
washable Woolmark products provided that the
products are washed according to the instructions
on the garment label and those issued by the
manufacturer of this washing machine. M0807
CHILD LOCk
Use this option to prevent unwanted use
of the washer or to keep cycle settings
from being changed while the washer is
operating. Press and hold the OPTION
button for 3 seconds to activate or
deactivate CHILD LOCK.
The child lock indicator will be shown in the
display, and all buttons are disabled except the
POWER button.
Once CHILD LOCK is selected, the display will
alternate between CL and the time remaining.
NOTE: CHILD LOCK lasts after the end of the
cycle. If you want to deactivate this function, press
and hold the OPTION button for 3 seconds.
24
MFL62526858_en_100728.indd 24 7/28/10 4:20:44 PM