LG 55LB7200 - Manual (Page 27)

ENG
ENGLISH
27
MAKING CONNECTIONS
Connecting to a PC
y Use an HDMI connection for the best image quality.
y Depending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use.
y In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or
brightness. If noise is present, change the PC output to another resolution, change the refresh
rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture
is clear.
y The synchronization input form for horizontal and vertical frequencies is separate.
y Depending upon the graphics card, some resolution settings may not allow the image to be
positioned on the screen properly.
y If you are using DVI out from a PC, you have to connect analog audio separately. Refer to the
instructions on the next page.
y When using the HDMI/DVI cable, Single link is only supported.
NOTE
HDMI Connection or DVI to HDMI Connection
Choose method A or B to make connection.
Method A: HDMI Connection
IN
1 (ARC)
IN
3 (MHL)
IN
2
IN
1 (ARC)
IN
3 (MHL)
IN
2
RGB OUT (PC) AUDIO OUT
(PC)
RGB
(RGB/HDMI-PC)
AUDIO
(PC)
RGB
(RGB/HDMI-PC)
AUDIO
AUDIO OUT DVI OUT
HDMI
PC-AUDIO IN
L/MONO AUDIO R
CO
MP
ON
EN
T IN
/AV
IN
VIDEO/ Y P P B B P P R R
(*Not Provided)
PC
Choose any HDMI input port to connect.
It does not matter which port you use.