Operating instructions, Remote control, Power button – LG LW1812HR User Manual

Page 16: Operation mode selection button, On/off timer button, Fan speed selector, Room temperature setting button

Advertising
background image

16 Room Air Conditioner

1. POWER BUTTON

To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.

This button takes priority over any other buttons.

2. OPERATION MODE SELECTION BUTTON

Everytime you push this button, it will toggle COOL, FAN and HEAT.

3. ON/OFF TIMER BUTTON

Everytime you push this button, timer is set as follows.(1Hour 2Hours

3Hours

4Hours

5Hours

6Hours

7Hours

8Hours

9Hours

10Hours

11Hours

12Hours

Cancel)

4. FAN SPEED SELECTOR

Everytime you push this button, it is set as follows. (Hi[

] Low[

] Hi[

]....)

5. ROOM TEMPERATURE SETTING BUTTON

This button can automatically control the temperature of the room. The temperature can be set within a

range of 60°F to 86°F by 1°F.

Operating Instructions

You will usually use shut-off time while you sleep.

For your sleeping comfort,once timer is set,the temperature setting will raise 2 F after

30min and once again after another 30min.

C o o l:

Heater runs and heats the room.

Compressor runs and cools the room.

Use the

and FAN buttons to set the desied temperature

and circulation fan speed.

Fan :

Fan circulate air but compressor does not run.

Use the FAN button to set the desired fan speed.

Heat:

Use the

and FAN buttons to set the desied temperature

and circulation fan speed.

Remote control

The remote control and control panel will look like one of the following pictures.

Power

Temp

Fan Speed

Timer

Mode

Energy

Saver

Auto

Swing

1

4

2

6

7

3

5

REMOTE CONTROLLER

1

7

8

5

4

6

2

3

Operating Instructions

Advertising
This manual is related to the following products: