LG VX8600 - Manual (Page 84)

84 VX8600
SETTINGS & TOOLS
7.1 Add New Device
Pairing is the process that allows the handset to
locate, establish, and register 1-to-1 connection
with the target device.
For pairing new Bluetooth ® device
1. Follow the Bluetooth ® accessory instructions to
set the device to pairing mode.
2. Press [MENU], 2 times , , ,
or .
Set the desired device to pairing.
3. If Bluetooth ® power is set to off, you will be
prompted to turn power on. Select Yes
and press .
4. The device will appear in Add New Device
menu once it has been located. Highlight the
device and press
.
5. The handset will prompt you for the passcode.
Consult the Bluetooth ® accessory instructions
for the appropriate passcode (typically “0000”
- 4 zeroes). Enter the passcode and press
.
6. Once pairing is successful, select Yes and
press to connect with the device.
7. Once connected, you will see the device listed in
the Bluetooth ® Menu and the Bluetooth ® device
connected icon will show up on your
enunciator when connected to the Bluetooth ®
device. You can also check out the connection
with a blue icon on the list.
My Phone Name
Allows you to edit the name of the Bluetooth ®
device when Add New Device menu is highlighted.
1. Press [MENU], 2 times, , .
2. Press Right Soft Key [Options].
3. Press My Phone Name.
4. Press to clear the existing name.
5. Use the numeric keypad to enter a new custom
name.
6. Press to save and exit.
VX8600_(E) 1.2.qxd 3/29/07 11:05 AM Page 84