LG AN-WF500 - Manual (Page 5)

PREPARATION 5 TROUBLESHOOTING
TROUBLEShOOTING
Problem Solution
The network is not
connected
(no network
detected).
y Confirm that the LED indicator on the Wi-Fi/Bluetooth Dongle is
turned on.
y Confirm that the router is working properly.
The network
connection speed
is too slow.
y Check if there are other wireless devices near the TV set.
y Set the wireless router band to 5 GHz before using it.
(5 GHz is recommended.)
NOTE
y Data transmission speed varies depending on the network’s physical environment setting.
PRODUCT SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
Models AN-WF500
Dimensions
(W x H x D)
64 mm x 43.1 mm x 11 mm
Weight 21.46 g
Power consumption TX : 560 mA
RX : 250 mA
Interface USB 2.0
Security 64 / 128 bit WEP, WPA, WPA2, TKIP, AES, WPS
Environmental
conditions
Operating
temperature
0 °C ~ 60 °C
Storage
temperature
-20 °C ~ 60 °C
ENGLIS
h
Unpacking
Dongle Velcro Cable Owner’s
manual
Installing the Wi-Fi/Bluetooth Dongle
1 Attach the Wi-Fi/Bluetooth Dongle to the TV using the Velcro fastener and then
connect the dongle to the USB port of the TV using the USB cable.
USB IN
1
USB IN
2
USB IN
3
Velcro
2 Check to see if the Wi-Fi/Bluetooth Dongle is inserted correctly. The LED indicator
should be facing up.
NOTE
y For detailed network connection, please refer to your LG TV’s manual.
y If the dongle is not attached to the specified location, it may disconnect the network.
y Other wireless devices close to the TV may disrupt communication.