Alpine 68P21523Y62-B - Manual (Page 128)

English
128
Audio Processor
Operation (Optional)
↑
↓
(To be continued)
2
1 5
3 4
Press and hold the FUNC (RETURN) button for
at least 2 seconds in the Divider mode.
The mode changes to the Divider Adjustment
mode.
1
RETURN
Press the 2 (LEVEL) button. The mode
changes to the Level Adjustment mode.
2
LEVEL
Adjusting Levels
3
↑
↓
Press the rotary encoder and select the channel
you wish to adjust.
Each press changes the channels as follows:
When only one 2-way system divider is
connected:
→
L-Low
→
R-Low
→
F-High/L
R-High/R
←
R-High/L
←
F-High/R
←
When two 2-way system dividers are connected:
→
L-Low
→
R-Low
→
L-High
→
R-High
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment, and Rear adjustment modes,
and the display also changes.
→
L-Low
→
R-Low
→
L-High
→
R-High
When only one 3-way divider is connected:
→
L-Low
→
R-Low
→
L-Mid
→
R-Mid
→
L-High
→
R-High
When two 3-way dividers are connected:
→
L-Low
→
R-Low
→
L-Mid
→
R-Mid
→
L-High
→
R-High
Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
→
L-Low
→
R-Low
→
L-Mid
→
R-Mid
→
L-High
→
R-High