LG LGP505 - Manual (Page 90)

88
Safety Guidelines
at which RF is deposited in the heads of
wireless phone users. The test method uses
a tissuesimulating model of the human
head. Standardized SAR test methodology is
expected to greatly improve the consistency
of measurements made at different
laboratories on the same phone. SAR is
the measurement of the amount of energy
absorbed in tissue, either by the whole body
or a small part of the body. It is measured
in watts/kg (or milliwatts/g) of matter. This
measurement is used to determine whether
a wireless phone complies with safety
guidelines.
9. What steps can I take to reduce my
exposure to radiofrequency energy from
my wireless phone?
If there is a risk from these products - and
at this point we do not know that there
is - it is probably very small. But if you are
concerned about avoiding even potential
risks, you can take a few simple steps to
minimize your exposure to radiofrequency
energy (RF). Since time is a key factor in
how much exposure a person receives,
reducing the amount of time spent using a
wireless phone will reduce RF exposure. If
you must conduct extended conversations by
wireless phone every day, you could place
more distance between your body and the
source of the RF, since the exposure level
drops off dramatically with distance. For
example, you could use a headset and carry
the wireless phone away from your body
or use a wireless phone connected to a
remote antenna. Again, the scientific data
do not demonstrate that wireless phones are
harmful. But if you are concerned about the
RF exposure from these products, you can
use measures like those described above
to reduce your RF exposure from wireless
phone use.
10. What about children using wireless
phones?
The scientific evidence does not show
a danger to users of wireless phones,
including children and teenagers. If you
want to take steps to lower exposure to
radiofrequency energy (RF), the measures
described above would apply to children
and teenagers using wireless phones.
Reducing the time of wireless phone use
and increasing the distance between the
user and the RF source will reduce RF