Hooking up the unit, Revolving the lcd panel, Selecting the operation mode – LG DP885 User Manual

Page 8

Advertising
background image

8

Hooking up the unit

Audio and Video Connection for AV IN or AV OUT

Connect the AV IN/OUT jack on the unit to the corresponding input or output
jacks on your TV or an external device using the supplied AV cable as shown
below.

Revolving the LCD panel

You can revolve the LCD panel of the unit clockwise a maximum of 180
degrees for use. You can also operate the unit after revolving the LCD panel
180 degrees and folding it back down.

To revolve the LCD panel, place the unit on a stable and even surface such as
on a table. Push the LCD panel up and then lift it into a vertical position.
Revolve the LCD panel clockwise slowly 180 degrees. If you need, fold the
LCD panel after revolving it.
To revolve the LCD panel to its original position, open the LCD panel to a verti-
cal position. Revolve the LCD panel counterclockwise slowly 180 degrees.
• When finished using the unit, return the LCD panel to its original position.
• Do not leave the LCD panel in the face-up position, or sudden shocks may

damage it.

Selecting the operation mode

You need to select a operation mode before
using this unit. Press MODE on the unit and
the operation mode selection menu appears.
Use b / B to select a mode then press
ENTER.

• Select [DISC] to playback the inserted disc.
• Select [AV IN] to watch a video/audio signals from the external device using

this unit.

• Select [USB] to playback the file(s) in the connected USB Flash Drive.

Right side of the unit

Plug into the
“AV IN/OUT”
jack.

TV or the external device

Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.

A

W

T
fi
la
s

A

M
p

D
M

DP382-N_AUSALLR_MFL48000402 3/28/08 4:35 PM Page 8

Advertising