LG LGLX265 - Manual (Page 37)

2A. Phone Basics 25
To place a call using Prefix in Abbreviated Dialing:
1. While in Standby Mode, enter the last four or five
digits of the number you wish to call.
2. The five or six digits you set up at a Prefix will be
added and the resulting number will appear on the
screen. Press
to initiate the call.
Dialing From the Contacts List
1. Press > Contacts .
-or-
Press CONTACTS (right softkey).
2. Highlight an entry and press to dial the entry’s
default phone number.
– or –
To dial another number from the entry, highlight the
name and press
, and then highlight a number
and press .
Speed Dialing
You can store up to 98 numbers in your phone’s speed
dial memory. Dial speed dial entries using one keypress
for locations 2–9 or two keypresses for locations 10–99.
To use One-Touch Dialing for speed dial locations 2–9:
ᮣ While in Standby Mode, press and hold the
appropriate key for approximately two seconds. The
display confirms that you have dialed the number
when it shows “Calling...”.
To use Two-Touch Dialing for speed dial locations 10–99:
1. Press the first digit.
2. Press and hold the second digit for approximately
two seconds. The display confirms that you have
dialed the number when it shows “Calling...”.
Note Speed dialing is not available when you are
roaming; when you are roaming off the Nationwide
Sprint Network, you must always dial using eleven
digits (1 + area code + number).
Phone Basics
LX265_Eng(1.1)_0514:Sprint_UG_8a 09. 05. 21 3:45 Page 25