LG GW820 - Manual (Page 5)

6 7
Device Setup (cont.)
Charge the battery
1. Before connecting the charger to the phone, check to make sure the
battery is installed.
2. Connect the small end of the data cable to the USB port on the top of
your LG eXpo. TM
3. Connect the large end of the data cable to the power adapter.
4. Plug the power adapter into a power outlet.
5. Charge the battery until “Battery full” appears on the screen.
Power on the device
To turn on the device, press the button.
Calibrate the touchscreen
When turning on your phone for the first time, a touch calibration screen will
appear. Calibrating the device screen involves tapping with the stylus in the
center of the cross as it moves around the screen.
1. Tap Start > Settings > System > Screen.
2. On the Alignment tab, tap the Align Screen button and follow the
instructions on the screen. After calibration is completed, Align
Screen reappears. Click OK on upper right corner to return to the
home screen.
Top of device
USB
port Power
button
Insert a microSD™ memory card
(Sold separately)
Use a memory card to extend the memory available on your
LG eXpo
TM for storing media files such as ringtones, videos,
pictures or songs.
1. Lift the top edge of the cover and rotate to expose the
memory card slot.
2. Insert the memory card into the slot with the metal contacts
facing down.
3. Slide the card into the memory card slot until the card clicks
into place.
4. Rotate the cover back to its original position and press into
place.
5. To remove the card, open the memory card slot cover.
Push on the memory card. The card will partially eject.
Grab the end of the card and gently pull to remove
completely.
Note: Do not force the memory card into the slot.
If the card does not slide in easily, please check
that the card is being inserted the correct way or
if there is a foreign object in the slot.
On the right side of the phone, lift the memory card slot cover to
expose the slot.
the memory card in to partially eject it.
memory card into the
Rotate the memory card slot cover back to its original
position and press into place. key
USB/Charger
port
When turning on your phone for the first time, a touch calibration screen will
appear. Calibrating the device screen involves using the stylus to tap the targets
on the screen. You can also calibrate the screen at any time by following these
steps:
settings menu will reappear. Click OK on upper right corner to return to
the home screen.
the Screen
Connect the small end of the data cable to the USB/Charger port on
the top of your LG eXpo
TM .
button for 3 seconds.