LG DLGX0002TM - Manual (Page 28)

H O W TO U S E
THE LCD DISPLAY
The display shows the settings, estimated time remaining, options, and status messages for your
dryer. When the dryer is turned on, the light in the display will illuminate.
STATUS/CYCLE DISPLAY
This portion of the display shows the
selected cycle, operating status, and special
messages. If a cycle has special instructions,
they will also be displayed in this area.
1
2 ESTImATED TImE REmAINING
When the START/PAUSE button is pressed,
the dryer will display the estimated (SENSOR
DRY) or set time (TIME DRY) remaining, and
begin tumbling.
NOTE: The cycle time on SENSOR
DRY cycles may fluctuate as the dryer
recalculates drying time for optimal results.
9 CYCLE OPTION INDICATOR
These indicators show the cycle options for
ANTI BACTERIAL, DAMP DRY BEEP, and
WRINKLE CARE. For detailed information
about the individual options, please see the
following pages.
4 CYCLE COmPLETION INDICATOR
Shows how much of the current drying cycle
has been completed.
5 FLOW SENSE™ DUCT BLOCkAGE
SENSING SYSTEm INDICATOR
The FLOW SENSE™ duct blockage sensing
system detects and alerts you to blockages
in the ductwork that reduce exhaust flow
from the dryer. This improves operating
efficiency and helps minimize service calls,
saving you money.
6 CHILD LOCk INDICATOR
When CHILD LOCK is set, the Child Lock
indicator will appear and all buttons are
disabled except the ON/OFF button. This
prevents children from changing settings
while the dryer is operating.
7 ADD WATER INDICATOR
If the steam feeder is lack for water, this
error may be displayed. Fill the feeder and
restart the cycle.
NORMAL
NORMAL MEDIUM HIGH
0:41
EST. TIME
REMAINING
ADD WATER CHILD LOCK
20% 2
1
4
5
6
7 8 9
3
3 CYCLE SETTING INDICATORS
These indicators show the current cycle
settings for DRY LEVEL, TEMP. CONTROL,
TIME DRY, and BEEPER. To change these
settings, press the appropriate settings
button.
7 LINT FILTER INDICATOR
The dryer automatically detects reduced
air flow caused by a full lint filter. The LINT
FILTER indicator will light before each load
as a reminder to check the lint filter before
starting each load. If the lint filter becomes
clogged during a load, the indicator will
come on to let you know that the filter
should be cleaned immediately for maximum
efficiency. Always clean the lint filter before
every cycle.