Magic remote functions, 33 english – LG 84UB9800 User Manual

Page 33

Advertising
background image

33

ENGLISH

MAGIC REMOTE FUNCTIONS

MAGIC REMOTE FUNCTIONS

When the message

Magic remote battery is low. Change the battery

. is displayed,

replace the battery. To install batteries, open the battery cover, replace batteries

(1.5 V AA) matching and ends to the label inside the compartment, and close the

battery cover. Be sure to point the remote control at the remote control sensor on the TV. To remove

the batteries, perform the installation actions in reverse.

Do not mix old and new batteries, as this may damage the remote control.

CAUTION

This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote

sensor.

/INPUT

P

VOL

CH

(POWER)

Turns the TV on or off.

Wheel (OK)

Press the center of the Wheel

button to select a menu. You can

change channels and scroll the

menu by using the Wheel button.

(EXIT to LIVE)

Switches among broadcast

(antenna) and various inputs.

Color buttons

These access special functions in

some menus.

(

: Red,

: Green,

: Yellow,

: Blue)

VOL

Adjusts the volume level.

Displays the Screen Remote.

Accesses the Universal Control

Menu in some regions.

Pressing and holding the

button will display a menu to

select an external device that is

connected to the TV.

Used for viewing 3D video.

(MUTE)

Mutes all sounds.

By pressing and holding the

button, VD function will be

enabled.

SAP (Secondary Audio Program)

Feature can also be enabled by

pressing the

key.

CH

Scrolls through the saved

channels.

(BACK)

Returns to the previous screen.

(Home)

Accesses the Home menu.

(up/down/left/right)

Press the up, down, left or right

button to scroll the menu. If you

press

buttons while the

pointer is in use, the pointer will

disappear from the screen and

Magic Remote will operate like a

general remote control. To display

the pointer on the screen again,

shake Magic Remote to the left

and right.

(Voice recognition)

Network connection is required

to use the voice recognition

function.

1. Press the voice recognition

button.

2. Speak when the voice display

window appears on the left of

the TV screen.

Use the Magic Remote no

further than 10 cm (4 inch)

from your face.

The voice recognition may fail

when you speak too fast or too

slowly.

The recognition rate may

vary depending upon the

user’s characteristics (voice,

pronunciation, intonation, and

speed) and the environment

(noise and TV volume).

Advertising
This manual is related to the following products: