Charging with usb, Battery temperature protection, How to install your microsdt – LG LGVN251 User Manual

Page 24: How to install your microsd, Card .22, Getting started with your phone, Card

Advertising
background image

22

LG COSMOS

2

Getting Started with Your Phone

The charge time varies
depending upon the battery
level.

Charging with USB

You can use your computer to
charge your phone. To be able to
charge with the USB cable, you
need to have the necessary USB
driver installed on your PC first.
Connect one end of the USB cable
to the accessory/ charger port on
your phone and the other end to a
high-power USB port on your PC
(commonly located on the front
panel of the computer).

NOTE

Low-power USB ports are not
supported, such as the USB ports
on your keyboard or bus-powered
USB hub. The LG USB Driver is
downloadable from the www.lge.com.

Battery Temperature

Protection

If the battery gets overheated, the
phone will automatically turn off.
When you turn the phone back on,
a message pops up alerting you
that the phone was powered off for
your safety.

How to Install Your microSD

TM

Card

1. Remove the back cover and

locate the microSD

TM

slot.

2. Insert the microSD

TM

card with

the contacts facing downwards
until it clicks into the slot. If you
insert the card in the wrong
direction, it may damage your
phone or your card.

NOTE

Memory card is
sold separately.

NOTICE

Please make sure that the "B" side faces up
before inserting a charger or USB cable into
the charger port of your phone.

Advertising
This manual is related to the following products: