LG 47G2 - Manual (Page 19)

19
ENG
ENGLISH
Before Use
Registering the Remote Control
The Remote Control operates by pairing with your
TV.
Once you purchased the TV, please register the
Remote Control as follows;
How to register the Remote Control
Press the Wake-up pointer button to
pair the remote control.
How to Re-register the Remote Control after
Registration Failure
Reset the remote control by pressing
and holding the ꕣ BACK button for 3
seconds. (Once the reset is complete,
the light on the Pointer blinks.) Then
repeat the above procedure to register
the remote control.
How to use the zoom in/out
gestures
1 Press and hold the zoom button for 2
seconds.
2 While holding the zoom button, draw a
circle in a clockwise direction to zoom in
or counter-clockwise direction to zoom
out.
(This feature is only available while using
Web.)
Precautions to Take when Using
the Remote Control
y y Use the remote control within the maximum
communication distance (10 m, 32.8 ft).
Using the remote control beyond this
distance, or with an object obstructing it,
may cause a communication failure.
y y A communication failure may occur due to
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Remote
Control.
y y The Remote Control may be damaged or
may malfunction if it is dropped or receives a
heavy impact.
y y Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
y y It is recommended that an Access Point (AP)
be located more than 1 m (3.28 ft) away
from the TV. If the AP is installed closer
than 1 m (3.28 ft), the Remote Control may
not perform as expected due to frequency
interference.
y y LG Qwerty remote control or Logitech
google keyboard is only supported. Other
keyboard(HID) is may not be compatible.
y y When the Qwerty side is faced up, the
cursor is not moved to prevent the wobble.