LG LUV400T - Manual (Page 10)

10
OPERATION
Control Operation
1. Carpet / Floor: To toggle between the
agitato eing on or off.
NOTE: If the vacuum is in the upright
position the agitator will not run even if
the vacuum power is on.
2. HIGH MED LOW: To select the proper
suction of the vacuum such as High,
Medium or Low.
3. Power On/Off : To turn the vacuum on
and off.
4. Power button
This power button is only needed when the
batteries in the handle need to be changed. When
pressing the handle controls a blue light at the top
of control indicates the batteries are OK, if there is
not blue light when pressing the batteries should be
replaced.
If you need to still vacuum and replacement
batteries are not readily available the power button
on the main body can be used to run the vacuum
until the batteries are changed.
Body Release Operation
• To begin vacuuming, press the pedal on the left
side of the vacuum and pull down.
NOTE: When the vacuum is in the upright position
the agitator will not run.
POWER
1
2
3
4
Personal Injury Hazard
Do not set the vacuum on the stairs, always keep the unit on the floor.
WARNING
• Do not put anything, between body and
agitator head space.
Personal injury or product damage could result.
WARNING