8 system select – LG LGVN150S User Manual

Page 75

Advertising
background image

73

2. Press

Settings & Tools.

3. Press

Phone Settings.

4. Press

Security.

5. Enter the four-digit lock code.

6. Press

Lock Phone Now.

NOTE

To unlock the phone from standby

mode, press the Right Soft Key

Unlock and enter the four-digit lock
code.

7.7.5 Reset Default

Allows you to reset your phone to
the factory default settings.

1. Open the flip and press

[MENU].

2. Press

Settings & Tools.

3. Press

Phone Settings.

4. Press

Security.

5. Enter the four-digit lock code.

6. Press

Reset Default.

7. Press after reading the

warning message.

8. Highlight Revert and press

.

A confirmation message is
displayed briefly before the
phone resets itself.

7.7.6 Restore Phone

Allows you to erase all user data
and Contact information you've
entered in the phone's memory so

it's as if it just left the factory.

1. Open the flip and press

[MENU].

2. Press

Settings & Tools.

3. Press

Phone Settings.

4. Press

Security.

5. Enter the four-digit lock code.

6. Press

Restore Phone.

7. Press after reading the

warning message.

8. Enter the four-digit lock code.

7.8 System Select

Allows you to set up the phone
management environment. Leave
this setting as the default unless
you want to alter system selection
as instructed by your service
provider.

1. Open the flip and press

[MENU].

2. Press

Settings & Tools.

3. Press

Phone Settings.

4. Press

System Select.

5. Use the Directional Key

to

highlight a setting, then press

.

Home Only/ Automatic

Advertising
This manual is related to the following products: