LG 50PN4500 - Manual (Page 16)

ENGLISH
16 ASSEMBLING AND PREPARING
CAutIoN
y y Disconnect the power before moving or installing
the TV. Otherwise electric shock may occur.
y y If you install the TV on a ceiling or slanted wall,
it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel.
y y Do not over tighten the screws as this may cause
damage to the TV and void your warranty.
y y Use only screws and wall mounts that meet
the VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
NotE
y y Use only screws that are listed on the VESA
standard screw specifications.
y y The wall mount kit includes an installation manual
and necessary parts.
y y The wall mount bracket is optional. You can obtain
additional accessories from your local dealer.
y y The length of screws may differ depending on the
wall mount. Make sure to use the proper length.
y y For more information, refer to the manual supplied
with the wall mount.
tidying cables
1 Install the power cord holder and power cord. It will
help prevent the power cable from being removed
by accident.
2 Gather and bind the cables with the cable holder.
(For 42PN4500)
Power Cord Holder
(Depending on model)
Cable Holder
(For 50PN4500, 50/60PN5300, 50/60PN6500, 60PN6550)
Cable Holder Power Cord Holder
(Depending on model)
CAutIoN
y y Do not move the TV by holding the cable holder
and power cord holder, as the cable holders may
break, and injuries and damage to the TV may
occur.
NotE
y y If you install the TV on a Wall, detach the cable
holder from stand body and attach it to the
protection cover or to the back cover to help keep
the cables organize.