LG LGVX9800 - Manual (Page 77)

The V 75
NOTE
If you want to use the bluetooth function connecting
the PC, or PDA should be paired with the phone. If
it's not, you cannot use the bluetooth PC connection,
even if the Bluetooth port is selected.
NOTE
Read the user guide of each device (i.e. PC, PDA, or
Hands-free car kit) because the usage might be different.
Access and Options
1. Press [MENU].
2. Press 2 times [SETTINGS & TOOLS].
3. Press Bluetooth.
4. Select a sub-menu.
Paired Devices / Power / My Visibility / My Bluetooth
Name / My Bluetooth Info
9.1 Paired Devices
Pairing is the registration process that permits the handset to locate and
establish a 1-to-1 connection with the target device. Devices that are not
paired cannot be connected. To “Pair” the V, enable the pairing mode of the
target device (consult the user guide of the target device for directions). Make
sure that Bluetooth TM is enabled in the handset and begin “Searching” When
the handset locates the Bluetooth-enabled target device as a result of
“Searching” you must register the pass key (PIN code) of the device in the
handset. When the registration and “Pairing” are complete, your phone and
device can be connected immediately.
For pairing new Bluetooth device
1. Press [MENU], 2 times, , .
Set the desired device to pairing.
NOTE
To pair Bluetooth device with handset, the device is
set to be available for pairing (bondable). Regarding
"Bondable" setting, refer to the manual of the product.
2. Press Right Soft Key [New].
NOTE
Users can store up to 20 Bluetooth devices to the
Paired Devices List.
NOTE
The V will display all devices found within 30
seconds. If Search is pressed within the 30 second
duration, the phone will stop searching and display
only those devices found up to that time.
3. Among Bluetooth TM devices found, select the desired
device to register and press [PAIR].
The V(E).qxd(1.2)_TTY MODE 2005.11.25 3:53 AM Page 75