Warning, About the automatic icemaker – LG LFX23961SB User Manual

Page 27

Advertising
background image

28

ABOUT THE AUTOMATIC ICEMAKER

OPERATION INSTRUCTIONS

A newly-installed refrigerator may take
12 to 24 hours to begin making ice.

The icemaker will produce 5 pcs cubes per cycle
approximately 60-80 cubes in a 24-hour period, depending
on freezer compartment temperature, room temperature,
number of door openings and other operating conditions.

If the refrigerator is used before the water connection is
made to the icemaker, set the power switch to O (off).

When the refrigerator has been connected to the water
supply, set the power switch to I (on).

The icemaker will fill with water when it cools to freezing.
Anewly-installed refrigerator may take 12 to 24 hours to
begin making ice cubes.

Throw away the first few batches of ice to allow the water
line to clear.

Be sure nothing interferes with the sweep of the feeler
arm.

When the bin fills to the level of the feeler arm, the
icemaker will stop producing ice.

It is normal for several cubes to be stuck together .

If ice is not used frequently, old ice cubes will become
cloudy, taste stale, and shrink.

NOTE: If the cube size is smaller or larger than you
expected, you can regulate the size with the cube size
button. (nomally caused by variations in water pressure.)

Every time you press the cube size button, the indicator
light go up. The higher position light is on, the larger
cubes will be. (1st step is the next after the 5th step.)

WHEN YOU SHOULD SET THE ICEMAKER
POWER SWITCH TO O (OFF)

When the water supply will be shut off for several hours.

When the ice storage bin is removed for more than a
minute or two.

When the refrigerator will not be used for several days.

NORMAL SOUNDS YOU MAY HEAR

The icemaker water valve will buzz as the icemaker fills
with water. If the power switch is in the I (on) position, it
will buzz even if it has not yet been hooked up to water.
To stop the buzzing, move the power switch to O (off).

NOTE: Keeping the power switch in the I (on) position
before the water line is connected can damage the
icemaker.

You will hear the sound of cubes dropping into the bin
and water running in the pipes as the icemaker refills.

PREPARING FOR VACATION

Set the icemaker power switch to O (off) and shut off the
water supply to the refrigerator.

If the ambient temperature will drop below freezing, have
a qualified servicer drain the water supply system (on
some models) to prevent serious property damage due to
flooding from ruptured water lines or connections.

Personal Injury Hazard

Avoid contact with the moving parts of the ejector
mechanism, or with the heating element that releases
the cubes. DO NOTplace fingers or hands on the
automatic icemaking mechanism while the refrigerator
is plugged in.

NOTE: Automatic Ice Maker feature is included only in
certain models. Please check your product specification.

Automatic

Icemaker

Cube Size
Indicator Light

Cube Size
Select Button

Power Switch

WARNING

Shut off Arm

Ejector

Advertising
This manual is related to the following products: