Timer on/off, Convection auto conversion – LG LRE3027ST User Manual

Page 13

Advertising
background image

ENGLISH

13

fEAtURES

TIMER ON/OFF

The TIMER ON/OFF serves as an extra timer in the kitchen
that will sound when the set time has run out. It does not
start or stop cooking.

The TIMER ON/OFF feature can be used during any of the
oven control functions.

Setting the Timer

1. To set hours and minutes: Press the TIMER ON/

OFF button once.
To set minutes and seconds: Press the TIMER ON/
OFF
button twice.

2. Use the number buttons to set the timer.

For example, to set the timer for five minutes: Press
the TIMER ON/OFF button once and then press the
5 button.

3. Press Timer or START button to start the timer. The

time will count down and the time will show in the
display.

If TIMER ON/OFF or START button is not

pressed, the timer will return to the time of
day.

NOtE

4. When the set time has run out, End will appear in the

display. The indicator tones will sound every 15 sec-
onds until TIMER ON/OFF is pressed.

To Cancel the Timer

1. Press the TIMER ON/OFF button once. The display

will return to the time of day.

If the remaining time is not shown in the display, re-

call the remaining time by pressing the TIMER ON/
OFF
button.

NOtE

RAPID PREHEAT

The Rapid Preheat feature can preheat your oven up to
20% faster than the normal preheat function.

Setting Rapid Preheat

1. Press the cook function button (ex. the BAKE but-

ton).

2. Using the number buttons, enter the cook time.

3. Press the START button

4. Press the RAPID PREHEAT button.

CONVECTION AUTO CONVERSION

When cooking using convection cycle (Conv. bake and
roast), the oven temperature is automatically reduced by
25°F. The display will show the changed temperature.
This feature is called ”AUTO CONVERSION”. Your range
comes with this feature “ENABLED”.

To DISABLE the auto conversion feature, follow below .

1. Press the SETTING button one time. “AUTO” will ap-

pear in the display.

2. Press the 1 button to ENABLE or press the 2 button

to DISABLE.

3. Press the START button to accept the change.

Advertising