Before calling for service – LG DLGX2902V User Manual
Page 38
FLOWSENSE
indicator light is on
during the drying
cycle
• Ductwork is too long or has
too many turns/restrictions.
• Significant blockage of the
ductwork due to lint buildup
or debris.
• Install a shorter or straighter duct run. See the
Installation Instructions.
• Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
BEFORE CALLING FOR SERVICE
(cont.)
Problem
Possible Causes
Solutions
Steamdoesn’t
generate but no error
code is shown.
• Water level error.
• Unplug dryer and call for service.
Garments still
wrinkled after
STEAMFRESH
™
.
• Too many or too different
types of garments in dryer.
• Small loads of 1 to 5 items work best.
• Load fewer garments. Load similar-type garments.
There are no creases
left on garment after
STEAMFRESH
™
.
• The function of this cycle
is to remove wrinkles from
fabric.
• Use an iron to make creases.
Garments have
static after REDUCE
STATIC.
• This is normal.
• Depends on individual moisture level in skin.
Garments are too
damp or too dry after
REDUCESTATIC.
• Correct drying options not
selected.
• Select load weight manually before starting
REDUCE STATIC option.
Garments are not
uniformly damp after
EASYIRON.
• This is normal.
• Depends on the amount or type of garments.
Water drips from door
duringSteamCycle.
• This is normal.
• This is steam condensation on door surface.
Steamisnotvisible
duringSteamCycle.
• This is normal.
• Steam vapor is difficult to see when the door is
closed.
Drum does not turn
duringSteamCycle.
• This is normal.
• The drum is turned off so that the steam vapor
remains in the drum.
Cannot see steam
vapor at the
beginning of cycle.
• This is normal.
• Steam is released at different stages of the cycle
for each option.
• MORE TIME button pressed.
Odors remain in
clothing after
STEAMFRESH
™
.
• STEAMFRESH
™
did not
remove odor completely.
• Fabrics containing strong odors should be
washed in a normal cycle.
The display shows
.
• Pressing the MORE TIME button several times will
set the cycle for a large load such as a comforter.
38