LG GW370 - Manual (Page 78)

74
Audio & Ringtones
There are 5 sound modes: General, Vibrate
All, Alarm Only, and Silent All.
Preferences can be set in the Audio &
Ringtones menu. In addition, pressing and
holding the
key while on the dialpad in
the standby screen switches between Normal
Mode and Vibrating Mode.
Shop Tones
Connects to the AT&T Ringtone store.
Ringtone
] Sounds: Displays and plays ringtones
and allows you to select your preferred
Ringtone.
] Volume: This menu controls ringtone
sound volume.
] Alert Type: Supports 3 ring alert types:
Ring, Ring and Vibration and Ring after
Vibration.
] Increasing Ringtone: Allows you to
enable or disable Increasing Ringtone,
which is played when you receive an
incoming call.
n Note
Full length music tracks cannot be set as either
ringtones or message tones.
Message Tone
] Sounds: Allows you to access and
play your message tones. These can be
downloaded ringtones from Ringtone shops.
] Volume: This menu controls Message Tone
sound volume.
] Alert Type: Supports 4 message alert
types: Silent, Vibrate, Ring Only and Ring
& Vibrate.
] Alert Interval: Support 5 alert intervals:
Once, Every 2 Min, Every 5 Min, Every 10
Min and Every 15 Min.
Alert Tone
] Sounds: Allows you to select a set of alert
tones. Supports 2 alert tone types: Alert
Tone 1 and Alert Tone 2.
] Volume: This menu controls Alert Tone
sound volume.
] Alert Type: You can select to turn Alert
Tones to Ring or Silent.
Settings