Caution, Using your refrigerator – LG LFC25765SW User Manual

Page 17

Advertising
background image

16

ENSURING PROPER AIR CIRCULATION

In order to obtain stable temperature, the air must flow

between the freezer and refrigerator sections. As shown

in the illustration below, the cold air enters through

the bottom part and circulates upward. This air returns

below the freezer floor and the rest of the air enters the

refrigerator section through the top vent.

MULTI FLOW

• The cooling fan operates more powerful and effective

than when in normal operation. This is especially

noticeable when new food is placed in the refrigerator

compartment.

• If the lining is damaged, water or other substances

could enter through the cool air vent causing

decreased efficiency.

Do not block any of these vents with packages of food.

This can interrupt the flow of air and cause temperature

and moisture problems.

IMPORTANT: Because air circulates between both

sections, any odors formed in one section will transfer

to the other. You must thoroughly clean both sections to

eliminate odors. To prevent odor transfer and drying out

of food, make sure you wrap or cover foods tightly (See

the

“Food Storage Guide” section for details).

ICE PLUS

Press the button ICE PLUS. The LED light will turn on.

This function will remain activated for 24 hours and

intensify the cooling speed of the freezer and increase

ice production.

DOOR ALARM

With this feature you will hear an alarm when the freezer

or refrigerator door is open for more than 1 minute.

These tones will repeat every 30 seconds. The alarm is

cancelled when the door is properly shut. To activate or

deactivate Door Alarm, press the button ALARM.

ENERGY SAVING MODE

NOTE: Energy-Saving Mode function is set from factory.

To activate or deactivate Energy-Saving Mode, open the

doors and then press the ENERGY SAVING button for

3 seconds.

This function is recommended for added energy savings.

(Some heaters to reduce excess moisture on the

refrigerator may be turned off)

The energy saving function is also recommended during

long periods of time spent away from home-like vacation.

CAUTION WHEN CLOSING THE DOOR

CAUTION

To reduce the risk of door scratches, please make

sure that the refrigerator door mullion is always folded

in.

If dew gathers on the refrigerator door mullion at any

point, deactivate the Energy Saving mode until the

issue resolves itself.

ADJUSTING THE CONTROLS

Your refrigerator has two controls that allow you to

regulate the temperature the freezer and refrigerator

compartments.

Initially set the REFRIGERATOR CONTROL at 37°

degrees F and the FREEZER CONTROL at 0° degrees

F. Leave them at these setting for 24 hours (one day) to

stabilize. Then adjust the compartment temperature as

illustrated above.

Refrigerator Control: 32 °F to 47 °F (0 °C to 8 °C)

To adjust the temperature in the refrigerator compartment

open both doors, then press the REFRIGERATOR button

to cycle through the range of available settings.

Freezer Control: -6°F to 9 ° F ( - 21°C to -13°C)

To adjust the temperature in the freezer compartment

open both doors, then press the FREEZER button to

cycle through the the range of available settings.

Temperature Display

To change the temperature display from Fahrenheit to

Celsius:

1. Simultaneously press and hold the FREEZER and

REFRIGERATOR buttons for more than 5 seconds.

2. Do the same to convert back to Fahrenheit.

USING YOUR REFRIGERATOR

Advertising
This manual is related to the following products: