LG F9200 - Manual (Page 77)

73
Settings
Fixed Dial Number (FDN) (Menu 9.5.3)
Allows you to restrict your outgoing calls to selected
phone numbers, if this function is supported by your
SIM card. The PIN2 code is required.
The following options are available:
]
Enable: You can only call phone numbers stored in
the Address Book. You must enter your PIN2.
]
Disable: You can call any number.
]
Number List: You can view the number list saved as
fixed dial number.
n
Note
Not all SIM cards have a PIN2. If your SIM card does not,
this menu option is not displayed.
Change Codes (Menu 9.5.4)
The Change codes feature allows you to change your
current password to a new one. You must enter the
current password before you can specify a new one.
You can change the access codes: Security Code,
PIN1 Code, PIN2 Code
n
Note PIN: Personal Identification Number.
Connection
Menu 9.6
GPRS Attach (Menu 9.6.1)
If you select Power On and you are in a network that
supports packet data, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive e-mail, is quicker. If
you select When Needed, the phone will use a packet
data connection only if you start an application or
action that needs it. The GPRS connection is closed
after it is not used by any application.
n
Note
If there is no GPRS coverage and you have chosen Power
on, the phone will periodically try to establish a packet data
connection.
Network Profile (Menu 9.6.2)
This feature sets the Profile during the WAP and MMS
connections. The Profile menu under the Access Point
feature will display Add, Delete and Editor options, but
the reason why Activate option is not available is
because there is no way of knowing whether WAP or
MMS will be used to activate the content.