LG 55LE5400 - Manual (Page 18)

NETWORK
18
ꔛ This feature requires an always-on
broadband internet connection.
ꔛ You do not need to connect to a PC
to use this function.
ꔛ If Network Setting is not working,
check your network conditions. Check
the LAN cable and make sure your
router has DHCP turned on if you
wish to use the Auto Setting.
ꔛ If the Network Setting is not com-
pleted, network may not operate nor-
mally.
ꔛ IP Auto Setting: Select it if there is a
DHCP server on the local area net-
work (LAN) via wired connection, the
TV will automatically be allocated an
IP address. If you’re using a broad-
band router or broadband modem
that has a DHCP (Dynamic Host
Configuration Protocol) server func-
tion. The IP address will automatically
be determined.
ꔛ IP Manual Setting: Select it if there is
no DHCP server on the network and
you want to set the IP address manu-
ally.
NETWORK
ꔂ Move ꔉ Enter
• Network Setting : Wired
• Network Status : Internet is connected
• Legal Notice
• ESN
Wired Network Setup
1
MENU Select NETWORK.
2
ENTER Select Network Setting.
3
ENTER Select Wired.
4
ENTER
If you already set Network Setting:
Select Resetting. The new connection
settings resets the current network
settings.
5
ENTER
Select IP Auto Setting or IP Manual
Setting.
1 2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7 PQRS 8 TUV
0
9 WXYZ
When Selecting IP Manual Setting:
IP addresses will need to be input
manually.
6
ENTER Select Enter.
IP Auto Setting
If you already set
the Network Setting
IP Manual Setting
If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network
settings to be adjusted.
For detail information, contact your internet provider or router manual.
Network Type
Wired network is recommended
Wired
Wireless
Network Setting
Select the IP setting mode.
IP Mode
◀ IP Auto Setting ▶
ꔈ IP Address 255 . 255 . 0 . 0
ꔈ Subnet Mask 255 . 255 . 0 . 0
ꔈ Gateway 255 . 255 . 0 . 0
ꔈ DNS Server 255 . 255 . 0 . 0
ꕉ Previous
Enter
ꕯ Exit
Network Setting
Insert the IP address.
IP Mode
◀ IP Manual Setting ▶
ꔈ IP Address 255 . 255 . 0 . 0
ꔈ Subnet Mask 255 . 255 . 0 . 0
ꔈ Gateway 255 . 255 . 0 . 0
ꔈ DNS Server 255 . 255 . 0 . 0
ꕉ Previous
Enter
ꕯ Exit
Network Status
Network connecting
Setting Test Close
Previous setting value exists. Do
you want to connect with the
previous setting?
Enter
Resetting
ꕯ Exit ꔉ Next
TV
Appeared when wired and
wireless are simultaneously
connected.