LG LCV900B - Manual (Page 10)

10
OPERATION
Control Operation
1. MAX : For maximum suction of the vacuum
cleaner.
2. MIN : For minimum suction of the vacuum
cleaner.
3. FLOOR/CARPET : To turn the agitator on or off.
4. OFF: To turn the canister off.
Adjusting for Carpet Pile Height
To adjust for pile height:
It may be necessary to raise and lower the power
head for various carpet pile heights.
Press the right foot pedal to adjust height of the
agitator. Each press will raise the agitator one notch.
Suggested pile height settings:
You may need to raise the head of the vacuum
cleaner to make vacuuming area rugs and longer
pile rugs easier.
For maximum cleaning performance, the following
carpet height settings are recommended:
• L – for bare floors
• ML – for standard carpet
• Higher settings – for very deep pile carpet where
easier pushing effort is desired, while maintaining
good cleaning performance.
There are 4 settings:
H = High
M = Medium
ML = Medium Low
L = Low
NOTE: If the vacuum is difficult to push, change the
height adjustment to the next highest setting.
Attention: Special care is required when vacuuming
certain types of carpet or flooring. Always check the
carpet or floor covering manufacturer’s recommended
cleaning instructions before vacuuming.
1
2
3
4
Personal Injury Hazard
Do not set the vacuum on the stairs, always keep the unit on the floor.
WARNING