Caution, Using your microwave oven, Learn about your microwave oven – LG LMV1831ST User Manual

Page 10: Clock, Child lock, Audible signals, Interrupting cooking

Advertising
background image

LEARN ABOUT YOUR

MICROWAVE OVEN

This section discusses the concepts behind microwave

cooking and introduces you to the basics you need to

know to operate your microwave oven. Please read this

information before using your oven.

To avoid risk of personal injury or property

damage, do not run the oven empty.
To avoid risk of personal injury or property

damage, do not use stoneware, large sheets of

aluminum foil, metal utensils, or metal trimmed

utensils in the oven. Keep aluminum foil at

least 1 inch from the oven wall, metal rack and

other pieces of foil.

Example: To set the clock for 8:00 am

CLOCK

When the oven is first plugged in or after a power failure,

the display will show " : " . If a time of day is not set, " : "

will show on the display until you press "Clock".

2. Enter the time by using the

number buttons.

1. Press Clock

3. Press START/Enter
(or Clock)

8 0 0

Example: To set the child lock.

1. Press and hold

STOP/Clear until you hear

2 beeps and "Loc" appears

(approximately 4 seconds).

Example: To cancel the child lock.

1.

Press and hold

STOP/Clear until

"Loc" disappears

(approximately 4 seconds).

CHILD LOCK

Use this safety feature to lock the control panel when

you are cleaning the oven, or so that children cannot

use the oven unsupervised.

- 10 -

USING YOUR MICROWAVE OVEN

CAUTION

AUDIBLE SIGNALS

A beep will sound each time you press a button.
4 beeps signals the end of a cooking cycle.

You can stop the oven during a cycle by opening

the door. The oven stops heating and the fan stops,

but the light stays on.

To restart cooking, close the door and press

START/Enter.

If you do not want to continue cooking, open
the door and press STOP/Clear.

INTERRUPTING COOKING

Audible signals are available to guide you

when setting and using your oven:


NOTE: If PM does not appear in the display, the clock is
seted to AM. To set the clock to PM, press

Clock twice

or until

PM appears in the display. Then press START.

Advertising
This manual is related to the following products: