LG 50PB6650 - Manual (Page 20)

ENGLISH
20
REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly. To install batteries,
open the battery cover, replace batteries (1.5 V AAA) matching the and
ends to the label inside the compartment, and close the battery cover. Failure to match the correct
polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or
ambient pollution. To remove the batteries, perform the installation actions in reverse.
y Do not mix old and new batteries, as this may damage the remote control.
CAUTION
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote
sensor.
FLASHBK
MY APPS SMART
VD/ SLEEP
(For PB6600/PB6650 series)
(POWER) Turns the TV on or off.
TV Returns to the last TV channel.
CAPTION Activates or deactivates the subtitles.
AV MODE Selects an AV mode.
RATIO Resizes an image.
INPUT Changes the input source. Turns the TV on if it is off.
Number button Enters numbers.
- (Dash) Inserts a dash between numbers such as 2-1 and 2-2.
LIST Accesses the saved channel list.
FLASHBK Alternates between the two last channels selected (pressing repeatedly).
VOL Adjusts the volume level.
FAV Accesses your favorite channel list; Selects a menu or option.
INFO Shows information on the current program.
MUTE Mutes all sounds.
CH Scrolls through the saved channels.
PAGE Moves to the previous or next screen.
Accesses the AV devices connected to the TV; Opens the SIMPLINK
menu.
SMART
Accesses the Home menu.
MY APPS Shows the list of Apps.
SETTINGS Accesses the main menu.
Q.MENU Accesses the quick menu.
Navigation buttons Scrolls through menus or options. (up/down/left/right)
OK Selects menus or options and confirms your input.
BACK Returns to the previous screen.
EXIT Clears all on-screen displays and returns to TV viewing.
SLEEP Sets the length of time until the TV to turns off.
VD/ Enables VD function. SAP (Secondary Audio Program) feature can also be
enabled by pressing the VD key.
Control buttons ( , , ,
, ) Controls the SIMPLINK compatible devices
(USB,SIMPLINK).
(Freeze) Freezes the current frame (Not supported when using USB Mode and
SIMPLINK).
Color buttons These access special functions in some menus.
(
: Red, : Green, : Yellow, : Blue)