Cleaning metallic parts – LG LSDF9962ST User Manual

Page 23

Advertising
background image

ENGLISH

23

CARE & CLEANING

• Pull the upper rack forward. Make sure that the

water jet holes are not blocked by food particles.

• When cleaning is necessary, remove the upper

spray arm by turning the nut on the bottom of
the spray arm 1/8 turn counterclockwise and
pulling down.

• After cleaning the upper spray arm, press it

up into place. Turn the nut 1/8 turn clock-
wise to make sure that the nut locks back
into place.

CLEANING METALLIC PARTS

Some exterior and interior parts can be cleaned with a damp cloth
or sponge. A cloudy film may form on the surface of the stainless
steel tub, especially with hard water.

y

Make sure that the water jet holes are not blocked by food par-
ticles.

y

When cleaning is necessary, remove the lower spray arm by
pulling up.

y

After cleaning the lower spray arm, replace it by pushing down
until it clips into place. Be sure that the spray arm is able to turn
freely.

CLEANING THE LOWER SPRAY ARM

CLEANING THE UPPER SPRAY ARM

Advertising