LG LGVM701 - Manual (Page 174)

172
2. From the Bluetooth settings page, tap
Discoverable to place a checkmark and make your device
visible. Your device must be visible to successfully pair with an external device.
3. Tap
Scan for devices. (Your device will display a list of discovered in-range Bluetooth devices.)
4. Tap a device from the list to initiate pairing.
5. Depending on the device, you might have to tap
Pair to accept the passkey (if they match on both
devices), enter the passkey or PIN Code, or confirm matching passkeys.
6. Tap
Done > OK if you entered a passkey, PIN code, or passkey.
7. The external device will then have to accept the connection and enter your device’s PIN code.
● ●
Once successfully paired to an external device, appears within the Status Bar.
To disconnect a paired device:
Disconnecting a paired device breaks the connection between the device and your LG VM701, but
retains the pairing. At a later point when you wish to reconnect the device, there is no need to setup
the connection information again.
1. Verify your Bluetooth is turned on.
2. From the Bluetooth settings page, tap the previously paired device (under the Bluetooth devices section).
Note
Due to different specifications and features of other Bluetooth-compatible devices, display and operations may be different,
and functions such as transfer or exchange may not be possible with all Bluetooth compatible devices.
Pairing between two Bluetooth devices is a one-time process. Once a pairing has been created, the devices will continue
to recognize their partnership and exchange information without having to re-enter a passcode again.
Tools and Calendar