LG LBC20514SW - Manual (Page 11)

10
2. Installing Refrigerator Door
• Remove the cover (1) using a flat head screwdriver (this requires a little force), loosen the two screws (2) and place
on the opposite side.
• Place the hinge (3) on the opposite side and install the four screws (4 & 5).
• Insert the pin (6) in the hinge (3).
• Remove the cover (7) and install it on the right side.
• Place the door and line up with the pin holes (8), making sure that both parts are aligned.
• Place the top hinge (9) and insert the three screws (10).
• Position the cover of the hinge over this (11).
• Check that the door has been installed correctly.
HOW TO REMOVE THE DOOR HANDLES
NOTE: The appearance of the handle may appear
different.
3. Removing the Refrigerator Handle
• Loosen the fixation screws (1) with a 3/32 inch Allen
Wrench and remove the handle (2).
• Remove the assembly screws (3) with a 1/4 inch Allen
Wrench.
• Carefully remove the plug buttons from the door (4).
The buttons can be unscrewed using your fingers,
turning counter-clockwise. Continue turning until the
screw is loose and falls out.
• Install the buttons (4) on the left side.
4. Replacing the Refrigerator Handle
• Rotate handle upside down (1).
• Insert the assembly screws on the opposite side of the
door (2).
• Hold the handle in place with the holes lined up with
the screw holes (3) and tighten the screws (4) in place
with the 3/32 inch Allen Wrench.
1
2
3
4
3
2
4
4
Assembly
Screws
Fixation
Screws
Allen
Wrench
REFRIGERATOR INSTALLATION REFRIGERATOR INSTALLATION
2
5
1
6
3
4 8
11
10
9 7
1