Power – LG PB60G User Manual

Page 5

Advertising
background image

5

SAFETY INSTRUCTIONS

Power

WARNING

y

The earth wire should be connected.

- Inappropriate earth grounding may

cause damage to the projector or

an electric shock when there is an

electrical surge.

If the projector must be installed at

a place where earth grounding is not

possible, purchase a circuit breaker

and connect the projector to its wall

outlet.

Do not ground the projector to the

gas pipe, water pipe, lightning rod,

or telephone line, etc.

y

The power plug should be fully insert-

ed into the wall outlet.

- Unstable connection may cause a

fire.

y

Do not place heavy objects on the

power cord or place the cord under-

neath the projector.

- This may cause a fire or an electric

shock.

y

Never touch the power plug with a

wet hand.

- This may cause an electric shock.

y

Do not connect too many devices to

the same power extension.

- Overheating may cause a fire.

y

Remove dust or contaminants around

power plug pins or wall outlets.

- This may cause a fire.

y

To turn off the main power, remove

the power plug, which should be

positioned so it is easy to access for

operation.

CAUTION

y

Hold the plug firmly when unplug-

ging.

- A broken wire in the cord may

cause a fire.

y

Ensure the power cord or plug is not

damaged, modified, severely bent,

twisted, pulled, sandwiched or heated.

Do not use a loose wall outlet.

- This may cause a fire or an electric

shock.

y

Keep the power cord away from any

heating devices.

- The cord coating may melt and

cause an electric shock.

y

Place the projector where people will

not trip over or tread on the power

cord or plug to protect the power

cord and plug from any damage.

- This may cause a fire hazard or an

electric shock.

y

Do not turn the projector on or off by

plugging in the power plug or un-

plugging it from the wall outlet.

(Do not use the power plug as a

switch.)

- This may cause an electric shock or

damage to the projector.

y

Do not insert a conductor into the

other side of the wall outlet while the

power plug is inserted into the wall

outlet.

In addition, do not touch the power

plug immediately after it is discon-

nected from the wall outlet.

- This may cause an electric shock.

y

Use only the official power cord which

is provided by LG Electronics, Inc. Do

not use other power cords.

- This may cause a fire or an electric

shock.

Advertising