LG DTT901 - Manual (Page 8)

Setup
Setup Menu Features
Auto Tuning
Automatically finds all digital channels
available through the ‘Antenna In’ source
and stores all the active channels found.
Select “Auto Tuning” option then press
(Select) to start auto tuning.
EZ Add
Automatically adds new channels avail-
able through the antenna input to the
memorized channels already in the chan-
nel list.
Select “EZ Add” option then press
(Select) to start auto tuning.
Channel Edit
Channel Edit allows you to manually add
or delete channels from the channel list
in memory.
1. Select “Channel Edit” option then
press (Select) or i.
The Channel Edit menu appears.
2. Select a channel on the Channel Edit
menu.
3. Press (Select) to add or delete the
channel.
or
Press FAV to add the channel to the
Favorite Ch. list.
Manual Tuning
This feature manually adds or deletes
channels.
1. Select “Manual Tuning” option then
press (Select) or i.
2. Select a channel to add or delete.
3. Press (Select) to confirm your
selection.
4. Repeat steps 2-3 to add or delete
additional channels.
Output Channel
If you use the To TV (RF) jack, select
channel 3 or 4 to send RF signal from
the unit to your TV. Your TV must be
tuned to the selected channel to display
the picture.
Install Guide
The Install Guide is a convenient way for
you to customize the settings of this unit.
Select [Install Guide] option then press
(Select) and Install Guide menu will
appear, see page 7.
8
A password is required to gain access to Auto
Tuning, Manual Tuning and Install Guide menu
if the Lock System option is set to “On”
(See page 10).
Note
While watching TV, you can select a favorite
channel using FAV button on the Remote Control.
Tip
Deleted channels can not be selected with the
CH (u/U) buttons.
Note
LSX300-4PM_CUSALZK_ENG_4948 7/22/08 10:41 AM Page 8