LG W2344T-PF - Manual (Page 11)

10
Control Panel Functions
Use this button to enter a selection in the On Screen
Display. AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
W2044T : 1600 x 900
W2244T/W2344T : 1920 x 1080
Buttons Use these buttons to select or adjust functions in the
On Screen Display.
Use this function to select optimal image conditions in
accordance with the surrounding environment
(Brightness, Image type).
For more information, refer to page 14.
Use this button to turn the display on or off.
The power indicator stays blue if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking blue.
Power Button &
Power Indicator
When two input signals are connected, you can select
the input signal (D-SUB/DVI) you want. When only one
signal is connected, it is automatically detected. The
default setting is D-Sub.
(SOURCE Hot key)