LG LGLS990 - Manual (Page 23)

Phone Basics 13
Unlock Your Screen Using the Knock Code
Feature
The Knock Code feature allows you to create your own unlock code using a combination of knocks (or
taps) on the screen.
To activate the Knock Code feature:
1. Tap > > Settings.
2. From the DEVICE section, tap Lock screen.
3. Tap Select screen lock and tap Knock Code.
4. Use the 2x2 grid to create a sequence of knocks (or taps) to set your knock code.
Note: You have to create a Backup PIN as a safety measure in case you forget your unlock sequence.
To unlock the phone using Knock Code:
■ While the screen is off, tap the same sequence you established anywhere on the screen. The
Home screen will be accessed directly.
Guest Mode
Use Guest mode when you let someone else use your phone. They will only be able to use the
applications that you‟ve selected. Once you set it up, you can easily put your phone in Guest mode by
drawing the guest pattern on the Lock screen that you set, which is different from your normal unlock
pattern.
Note: Guests can also use applications that your selected applications link to.
Set Up Guest Mode
Follow the steps below to set up Guest mode and begin using it.