Warning, Plugging in the power cord and grounding, Test run – LG WM3570HVA User Manual

Page 17

Advertising
background image

17

ENGLISH

INSTALLATION INSTRUCTIONS

Plugging in the power cord and

grounding

Make sure to ground the washing machine to prevent a

short circuit or an electric shock when plugging in.

Using a 3-prong outlet

Plug in the electrical outlet without additional

grounding.

WARNING

y

The power outlet must be within 60 inches (1.5 m) of

either side of the washer.

y

The appliance and outlet must be positioned so that

the plug is easily accessible.

y

Do not overload the outlet with more than one

appliance.

y

The outlet must be grounded in accordance with

current wiring codes and regulations.

y

Time-delay fuse or circuit breaker is recommended.

y

It is the personal responsibility and obligation of the

product owner to have a proper outlet installed by a

qualified electrician.

y

Do not use a worn or damaged power cord or power

plug. Replace or repair it immediately. Failure to

do so may result in death, fire, electric shock, or

malfunction.

y

Do not modify the power cord and take care not to

damage it when installing or moving the washing

machine. Failure to do so may result in death, fire,

electric shock, or malfunction.

y

Make sure that the washing machine is grounded.

y

Connect this washing machine to a grounded outlet

conforming to the rating prior to use. Failure to do so

may result in fire, electric shock, or malfunction.

y

Do not use adaptors or extension cords. The washing

machine should always be plugged into its own

individual electrical outlet which has a voltage rating

that matches the rating plate. Failure to do so may

result in fire, electric shock or disorder.

y

Do not damage or cut off the ground prong of the

power cord. Doing so may cause death, fire, electric

shock, or product malfunction.

Test run

Check if the washing machine is properly installed and

run a test cycle.

1

Load the washing machine with 6 pounds of laundry.

2

Press

A

and turn

B

on the right

3

Press

to Rinse + Spin.

4

Press

C

.

- The wash cycle starts.

5

Check if water is supplied, that the washing machine
does not rock or vibrates excessively, and that it

drains well during the spin cycle.
- If water leaks during water supply, see page

14, Connecting the water lines to connect them

properly.

- If the washing machine rocks and vibrates

excessively, see page 16, Leveling the washing

machine to level it again.

- If the drain does not work, see page 15, Connecting

the drain line to install it properly.

Advertising